To order replacement parts for your Mustang Squeeze Tool, reference the diagram and chart for the correct part number and quantity then call a Mustang representative to place an order at 775.883.0732.
Download: 
DBM-60 Parts Diagram
| Item | Description | Qty | Part# |
| 1 | Hydraulic Cylinder Assembly | 1 | HCML-60 |
|
| 2 | 5/8"-11 NC x 2" Soc. Hd. Cap Screw | 4 | CPS-2 |
|
| 3 | Lower Jaw End Cap-Size | 2 | LJC-3 |
|
| 4 | LJ-60 Lower Bar | 1 | LJ-60-4 |
|
| 5 | Lower Jaw End Cap | 2 | LJE-5 |
|
| 6 | Nameplate, Model & Capacity | 1 | MCL-6 |
|
| 8 | 5/8"-11 NC Locking Hex Nut | 1 | LHN-8 |
|
| 9 | Nameplate, Hydraulic Operation | 1 | MHO-9 |
|
| Item | Description | Qty | Part# |
| 10 | Frame Assembly | 1 | FA-10 |
|
| 11 | 1/4" Dia. x 1-1/2" Roll Pin | 2 | RP-11 |
|
| 12 | SEG-30 Static Ground Spike Holster | 1 | H-30-12 |
|
| 13 | Cotter Pin Chain Assembly | 1 | CA-13 |
|
| 14 | 5/16" Flat Washer SAE | 1 | FW-14 |
|
| 15 | 1/4"-20NC x 3/8" Slotted Pan Head Screw | 1 | CPS-15 |
|
| 17 | Grease Fitting, (grease cap no longer avail) | 1 | P-7 |
|
| 18 | Upper Jaw Assembly | 1 | UJ6-18 |
|
| Item | Description | Qty | Part# |
| 1 | LIFTING EYE BRACKET | 1 | HC-16 |
|
| 2 | 5/8-11 x 1" HEX HEAD BOLT GRADE 5 | 2 | 1HB-2 |
|
| 3 | DUST CAP- MALE QUICK DISCONNECT | 1 | 3009-3 |
|
| 4 | MALE QUICK-DISCONNECT FITTING | 1 | 3010-3 |
|
| 5 | FEMALE x FEMALE FITTING, 3/8 | 1 | 3/8 FF-S |
|
| 6 | 10-32 x 1 1/4" SOCKET HEAD CAP SCREW | 8 | 114SHC-8 |
|
| 7 | DUST PLUG- FEMALE QUICK DISCONNECT | 1 | 3005-3 |
|
| 8 | FEMALE QUICK DISCONNECT FITTING | 1 | 3050-3 |
|
| 9 | CYLINDER PORT ADAPTER BLOCK | 2 | HC-13 |
|
| 10 | O-RING | 2 | 2-114 |
|
| 11 | 5/8 - 18 NF HEX NUT (GRADE 8) | 4 | 18HN-4 |
|
| 12 | TIE ROD WASHER | 4 | HC-12 |
|
| 13 | HEAD END CAP | 1 | HC-01 |
|
| 14 | O-RING | 2 | 2-016 |
|
| 15 | LOCKING VALVE ASSEMBLY | 1 | LV-04 |
|
| 16 | LOCKING VALVE SPACER | 1 | LV-08 |
|
| 17 | HOLLOW HEX PLUG | 1 | 10HP50N-S |
|
| 18 | BACKING RING | 2 | 8-238 |
|
| 19 | O-RING | 2 | 2-238 |
|
| 20 | STRAIGHT/FLARE ADAPTER FITTING | 2 | 4F50X-S |
|
| 21 | CYLINDER RETRACT HOSE | 1 | CRH-1 |
|
| Item | Description | Qty | Part# |
| 22 | TIE ROD, 16.25 | 4 | TR-4 |
|
| 23 | CYLINDER | 1 | CM-1 |
|
| 24 | PISTON RING | 1 | HC-06 |
|
| 25 | PISTON SEAL, POLYPAK, 3x33/4x3/8 | 1 | 461537503000 |
|
| 26 | PISTON BODY | 1 | HC-07 |
|
| 27 | BACKING RING | 2 | 8-023 |
|
| 28 | O-RING | 1 | 2-023 |
|
| 29 | 10-32 x 1/2" SOCKET HEAD CAP SCREW | 2 | 12SHC-2 |
|
| 30 | GLAND SEAL HOLD DOWN RING | 1 | HC-14 |
|
| 31 | O-RING | 1 | 2-032 |
|
| 32 | BACKING RING | 1 | 8-032 |
|
| 33 | PISTON ROD GLAND | 1 | HC-08 |
|
| 34 | PISTON ROD SEAL, POLY PAK | 1 | 18701437 |
|
| 35 | PISTON ROD WIPER | 1 | 940-16 |
|
| 36 | PISTON ROD | 1 | PR-1 |
|
| 37 | HOLLOW HEX PLUG | 1 | 4HP50N-S |
|
| 38 | ROD END CAP MOUNTING BASE | 1 | HC-20 |
|
| 39 | PISTON ROD ADAPTER SHAFT | 1 | HC-21 |
|
| 40 | QUICK-DISCONNECT NAMEPLATE | 1 | QDN-1 |
|
| 41 | DBM-60 CYLINDER ASSEMBLY, COMPLETE | 1 | M60-1 |
|
| 42 | SEAL KIT WITH PACKAGING | 1 | SK-60 |
|
