The Mustang DBML-80 Medium-Duty Hydraulic Squeeze Tool is similar to the DBGA-80 Mechanical Tool with the exception that it is hydraulically operated. A Mustang manufactured, double-acting, large-bore hydraulic cylinder mounts to the tubular frame, providing 41,000lbs of centralized force to PE pipe up to 8” IPS. A pair of SC-80 Saddle Clamps mechanically lock the upper and lower jaws and assist in completing the squeeze-off procedure. The cylinder is hydraulically locked with a Mustang pilot operated locking valve for complete safety.

Use of the DBML-80 on PE pipe that has a rough or rippled interior finish may result in less than bubble-tight squeeze-off. Refer to the "H" Series Hydraulic Tools for ultimate squeeze-off of pipe sizes shown.

Includes Model 20A Hydraulic Pump & Hose and a pair of SC-80 Saddle Clamps. An optional squeeze release control valve is also available that permits slow, controlled release of the upper jaw.

Weight:

Squeeze Tool — 132 lbs.
Lower Bar — 30 lbs.

Capacity:

Specify (2) Size (see table below)

 

3” IPS

4” IPS

 

6” IPS

8” IPS

download specs.

DBML-80 Includes: