The DBH-1200-B Quad-Bar Large Diameter Squeeze Tool utilizes three large-bore hydraulic cylinders located to assert 123,000lbs of force adjacent to the folds of the flattened pipe. The Model 20A 2-Stage Pump or an optional air-over-hydraulic pump provides the correct volume and pressure for safe, reliable compressive force in a controlled manner. A quad-bar lower jaw offers four surfaces for gap stops of your choice and beam strength required for a high load force.

Upon completion of the squeeze-off, the tool is automatically locked hydraulically and mechanically using special SC-1200 Saddle Clamps.

Release control can be achieved using the optional needle control valve located on the exhaust port of the manifold block.

Weight:

Squeeze Tool — 460 lbs.
Lower Bar — 40 lbs.

Capacity:

Specify (4) Size (see table below)

 

6” IPS

8” IPS

 

10” IPS

12” IPS

download specs.

DBH-1200 Includes: